Kelvin · today 7:12 AM
At Hlavná you have a reserved capacity of 250 kW, but over the last 12 months you never exceeded 168 kW. Lowering it to 185 kW saves you €2,340 a year. I've prepared the request for the distributor.
Kelvin is software. It reads your invoices and meter data, checks them against 23 known configuration errors, and tells you which ones apply to you and what they're costing you.
We'll show you what's in them before you decide anything.
Kelvin · today 7:12 AM
At Hlavná you have a reserved capacity of 250 kW, but over the last 12 months you never exceeded 168 kW. Lowering it to 185 kW saves you €2,340 a year. I've prepared the request for the distributor.
Kelvin · yesterday 6:40 AM
At Priemyselná your power factor dropped below 0.95 on March 1. For March that's a surcharge of roughly €180. The compensation can be fixed — I've prepared the brief for the electrician.
Kelvin · Monday 9:05 AM
The meter at the Sereď warehouse has been reporting double the usual consumption since Saturday. The invoice won't catch this — the numbers just don't match the surroundings. I recommend checking the meter.
Kelvin · Feb 12, 7:20 AM
The main breaker at Hlavná is rated for 400 A, but the peak never exceeds 250 A. Downsizing it to 315 A saves you €1,120 a year with no outage risk.
This is how Kelvin will write to you every time it finds something. Hover over the messages.
Where the money goes
It's not waste or bad habits. These are fixed fees set years ago for a load you no longer draw. They're billed every month and go unnoticed because the invoice looks correct on paper.
The power you pre-pay the distributor for. If it's set to 250 kW and you never exceed 168 kW, you're paying for 82 kW you don't use.
€1,200 to €12,000per year, per connection pointSince July 2025, you pay based on the main breaker's amperage. A breaker sized at building approval almost never matches today's actual load.
€300 to €4,000per year, per connection pointBelow 0.95, the distributor adds a surcharge. At 0.70 it's more than double the distribution price, and it's listed under an inconspicuous name on the invoice.
€500 to €9,000per year, per connection pointWhat we found at our clients
is the average annual value of our findings per client. Not a calculator estimate — the sum of concrete findings we delivered to clients.
A real case
A state institution with multiple buildings. One connection point started reporting exactly double its actual consumption in December. The invoice was fine, because the distributor bills from its own metering. So for eight months, the internal dashboard showed numbers that decisions were based on — and they weren't true.
Kelvin found it during its first data run, because it cross-checks meter readings against invoices. The previous system never caught it once.
These figures come from real operations. We don't share client names or addresses without their consent.
What you get
This is a real output, shortened. It's not just an alert with a number — it's a ready-made document you can bring to your distributor or your management.
Every finding has a quantified saving, evidence from your own data, and a recommended next step. Something you can actually bring to your distributor or your management.
Instead of digging through dashboards, just ask like you would a colleague. The answer is always grounded in your data — nothing is made up.
We track every finding from discovery through resolution to confirmation. Once you resolve it, the following months verify it against the baseline.
You'll know about a reserved-capacity overshoot immediately, not a year later on your bill — and it comes with a suggested fix right away.
See which of your buildings is worst, and by how much. One overview instead of fifteen separate dashboards.
A clear, sectioned report ready to download or bring to a meeting — no one has to assemble it by hand.
What Kelvin does for you
We process PDFs automatically. No spreadsheets, no forms, and nobody on your team enters data by hand.
Your existing meters, distributor data, and invoices are enough. No electrician, no investment, no disruption to the building.
It's not just a dashboard waiting for someone to dig through it. A reserved-capacity overshoot gets reported the same day, not a year later on your bill — with a suggested fix included.
An audit is just a snapshot. Kelvin runs every check every month, so a problem that starts in March gets found in March.
Two independent sources, checked against each other. This catches both billing errors and a broken meter.
Once you resolve a finding, Kelvin compares the following months to the baseline and confirms the real number. That's a number you can bring to a meeting.
Why you can trust the number
Values come from an exact calculation. AI is only allowed to explain them — it never fills in a number the calculation didn't produce.
ÚRSO decree 154/2024, law 321/2014, and current distributor price lists — always with a valid-from date.
An empty response from the distributor is a data gap, not zero consumption. If coverage is low, we don't report the finding.
Send us your invoices from the last twelve months. We'll get back to you within one business day with what we found.
By submitting you agree to the processing of your data under our privacy policy.
Don't have your invoices handy, or want to talk first?
What happens next